LVMA Electric Concludes Strong Debut at Egypt Energy 2026
LVMA Electric Concludes Strong Debut at Egypt Energy 2026
ATS, Molded Case Circuit Breakers and Voltage Protection Solutions Draw Steady Traffic at Booth H4.G61
LVMA Electric wrapped up its participation at Egypt Energy 2026, held from October 12 to 14 at the Egypt International Exhibition Center (EIEC) in Nasr City, Cairo. Set up at booth H4.G61, the company presented a focused portfolio of automatic transfer switches, molded case circuit breakers, and over/under voltage protection devices to regional distributors, EPC contractors, panel builders, and industrial end-users across the Middle East and North Africa.
1. Exhibition Overview
Egypt Energy 2026 returned as one of North Africa’s largest dedicated power and energy exhibitions, bringing together equipment manufacturers, system integrators, utility operators, and renewable energy developers. The three-day event centered on grid expansion, backup power reliability, and the integration of solar generation into low-voltage distribution networks. Visitors to booth H4.G61 included procurement managers from industrial facilities, electrical engineers working on building projects, and channel partners actively seeking competitive alternatives to established European and East Asian brands.
The Cairo venue, located along EI-Moshir Tantawy Axis in Nasr City, saw consistent foot traffic across all three days. LVMA’s booth stood out through a compact but product-rich display that grouped switching, protection, and monitoring devices into a single low-voltage distribution story—allowing visitors to follow the power path from grid incoming to final load protection.
2. ATS (Automatic Transfer Switch) Solutions
The automatic transfer switch lineup generated the most concentrated technical discussion. Displayed units covered both controller-based ATS configurations and integrated ATS panels, designed for uninterrupted switching between utility mains and standby generator supplies. Target applications included commercial office complexes, hospitals, hotels, telecommunications base stations, and food-processing plants where power downtime translates directly into operational loss.
Engineers at the booth asked detailed questions about transition timing, mechanical interlocking reliability, and compatibility with the diesel generator sets widely deployed across Egypt. The modular design—allowing panel builders to mix contactor or breaker-based switching without custom rework—was frequently cited as a practical advantage. Several attendees requested datasheets and one-line diagrams for immediate inclusion in their panel design proposals.
3. Molded Case Circuit Breakers
LVMA Electric presented its molded case circuit breaker range from 15A to 1250A, available in 3P and 4P configurations with thermal-magnetic and electronic trip options. These MCCBs serve as the main and feeder protection devices in distribution boards, motor control centers, and photovoltaic combiner boxes. Exhibition visitors were able to inspect the toggle action, terminal layout, and accessory slots directly, which helped them gauge assembly compatibility with their existing panel designs.
The DC-rated MCCB variants attracted particularly strong interest. With Egypt pushing forward utility-scale solar and distributed rooftop PV programs, panel builders and EPC contractors are actively sourcing DC protection that meets local cost targets without sacrificing breaking capacity and IEC-compliant construction. Questions focused on rated uninterrupted current, short-time withstand, and certification status for cross-border projects.
4. Over/Under Voltage Protection Devices
Completing the display were single-phase and three-phase over/under voltage protection relays. These compact DIN-rail devices safeguard sensitive equipment—from HVAC systems and refrigeration units to industrial controllers—against voltage sags, swells, and phase imbalance. In regions where grid supply can fluctuate due to load growth and distribution network aging, such protection is increasingly specified by consulting engineers.
Visitors asked about adjustable voltage thresholds, trip delay timing, manual versus automatic reset, and whether the relay could be integrated with smart monitoring or remote alarm systems. The slim housing and clear LED status indication were well received by panel builders looking to maximize usable rail space in feeder and distribution cabinets.
5. Market Feedback and Next Steps
Across the three days, the on-site conversation reinforced three consistent themes: price-performance balance, reliable lead times, and accessible English-language technical support. Several distributors requested sample units and printed catalog packs for internal evaluation, while a smaller group of EPC companies expressed interest in project-based pricing for upcoming infrastructure tenders.
LVMA Electric plans to follow up with qualified leads within two weeks of the show, providing detailed datasheets, certification documents, and quotation references tailored to the Egyptian market. The company also signaled its intent to expand its MENA distribution network, inviting regional partners to connect for product training, stocking arrangements, and margin discussions. Based on booth feedback, ATS and DC MCCB product lines are expected to lead initial order inquiries.
Share This Article
Follow Us
ATS, Molded Case Circuit Breakers and Voltage Protection Solutions Draw Steady Traffic at Booth H4.G61
LVMA Electric wrapped up its participation at Egypt Energy 2026, held from October 12 to 14 at the Egypt International Exhibition Center (EIEC) in Nasr City, Cairo. Set up at booth H4.G61, the company presented a focused portfolio of automatic transfer switches, molded case circuit breakers, and over/under voltage protection devices to regional distributors, EPC contractors, panel builders, and industrial end-users across the Middle East and North Africa.
1. Exhibition Overview
Egypt Energy 2026 returned as one of North Africa’s largest dedicated power and energy exhibitions, bringing together equipment manufacturers, system integrators, utility operators, and renewable energy developers. The three-day event centered on grid expansion, backup power reliability, and the integration of solar generation into low-voltage distribution networks. Visitors to booth H4.G61 included procurement managers from industrial facilities, electrical engineers working on building projects, and channel partners actively seeking competitive alternatives to established European and East Asian brands.
The Cairo venue, located along EI-Moshir Tantawy Axis in Nasr City, saw consistent foot traffic across all three days. LVMA’s booth stood out through a compact but product-rich display that grouped switching, protection, and monitoring devices into a single low-voltage distribution story—allowing visitors to follow the power path from grid incoming to final load protection.
2. ATS (Automatic Transfer Switch) Solutions
The automatic transfer switch lineup generated the most concentrated technical discussion. Displayed units covered both controller-based ATS configurations and integrated ATS panels, designed for uninterrupted switching between utility mains and standby generator supplies. Target applications included commercial office complexes, hospitals, hotels, telecommunications base stations, and food-processing plants where power downtime translates directly into operational loss.
Engineers at the booth asked detailed questions about transition timing, mechanical interlocking reliability, and compatibility with the diesel generator sets widely deployed across Egypt. The modular design—allowing panel builders to mix contactor or breaker-based switching without custom rework—was frequently cited as a practical advantage. Several attendees requested datasheets and one-line diagrams for immediate inclusion in their panel design proposals.
3. Molded Case Circuit Breakers
LVMA Electric presented its molded case circuit breaker range from 15A to 1250A, available in 3P and 4P configurations with thermal-magnetic and electronic trip options. These MCCBs serve as the main and feeder protection devices in distribution boards, motor control centers, and photovoltaic combiner boxes. Exhibition visitors were able to inspect the toggle action, terminal layout, and accessory slots directly, which helped them gauge assembly compatibility with their existing panel designs.
The DC-rated MCCB variants attracted particularly strong interest. With Egypt pushing forward utility-scale solar and distributed rooftop PV programs, panel builders and EPC contractors are actively sourcing DC protection that meets local cost targets without sacrificing breaking capacity and IEC-compliant construction. Questions focused on rated uninterrupted current, short-time withstand, and certification status for cross-border projects.
4. Over/Under Voltage Protection Devices
Completing the display were single-phase and three-phase over/under voltage protection relays. These compact DIN-rail devices safeguard sensitive equipment—from HVAC systems and refrigeration units to industrial controllers—against voltage sags, swells, and phase imbalance. In regions where grid supply can fluctuate due to load growth and distribution network aging, such protection is increasingly specified by consulting engineers.
Visitors asked about adjustable voltage thresholds, trip delay timing, manual versus automatic reset, and whether the relay could be integrated with smart monitoring or remote alarm systems. The slim housing and clear LED status indication were well received by panel builders looking to maximize usable rail space in feeder and distribution cabinets.
5. Market Feedback and Next Steps
Across the three days, the on-site conversation reinforced three consistent themes: price-performance balance, reliable lead times, and accessible English-language technical support. Several distributors requested sample units and printed catalog packs for internal evaluation, while a smaller group of EPC companies expressed interest in project-based pricing for upcoming infrastructure tenders.
LVMA Electric plans to follow up with qualified leads within two weeks of the show, providing detailed datasheets, certification documents, and quotation references tailored to the Egyptian market. The company also signaled its intent to expand its MENA distribution network, inviting regional partners to connect for product training, stocking arrangements, and margin discussions. Based on booth feedback, ATS and DC MCCB product lines are expected to lead initial order inquiries.
Contact Us
Related Blog
Contact Us
Have questions about our products or services? Our team is here to help you with any inquiries.